
High Performance Epoxy for Drone Manufacturing
Advanced Epoxy Adhesive Solutions for Next-Generation UAVs and Drones As UAV and drone technology continues to evolve, manufacturers require adhesive solutions that can withstand demanding
SYLGARD™ 186 Silicone Elastomer is a two-part, 10:1 mix ratio, high-viscosity, translucent encapsulant with high tear strength. It is designed for potting and encapsulation applications, providing reliable protection for electrical and electronic components. It offers room-temperature and heat-cure options, rapid processing, and meets UL requirements.
| Property | Unit | Part A (Base) | Mixed (After Mixing) | Cured |
|---|---|---|---|---|
| Viscosity | cP (mPa·s) | 123,800 | 66,700 | – |
| Working Time (Pot Life) at 25°C | hours | – | 1.65 | – |
| Heat Cure Time @ 100°C | minutes | – | – | 25 |
| Heat Cure Time @ 125°C | minutes | – | – | 15 |
| Heat Cure Time @ 150°C | minutes | – | – | 15 |
| Specific Gravity | – | – | – | 1.12 |
| Tensile Strength | psi (MPa) | – | – | 305 (2.1) |
| Elongation | % | – | – | 255 |
| Tear Strength (Die B) | ppi (N/cm) | – | – | 100 (70) |
| Durometer Hardness | Shore A | – | – | 24 |
| Dielectric Constant @ 100 Hz | – | – | – | 2.70 |
| Dielectric Constant @ 100 kHz | – | – | 2.68 | |
| Volume Resistivity | ohm·cm | – | – | 4.98E+15 |
| Dissipation Factor @ 100 Hz | – | – | – | 0.00002 |
| Dissipation Factor @ 100 kHz | – | – | 0.00006 | |
| Hardening Transition (DSC) | °C (°F) | – | – | -55 (-67) |
| Shelf Life at 25°C | months | – | – | 12 |

Advanced Epoxy Adhesive Solutions for Next-Generation UAVs and Drones As UAV and drone technology continues to evolve, manufacturers require adhesive solutions that can withstand demanding

Stronger Bonding. Cleaner Process. Reliable Performance. If you are looking for an adhesive that combines high adhesion strength, flexibility, and electronic safety, 3320-80 is the

Everwide FX219G5 Silicone Potting Compound – high-thermal, UL94 V-0 silicone potting for electronic modules. Compare with Shin-Etsu KET-132 silicone potting.

FX244-1 A specialized two-part silicone rubber designed for creating high-precision molds. This material features a unique oil-bleeding property that creates a self-releasing surface, eliminating the need for external non-stick sprays during demolding.
Avantek Viet Nam is a dynamic MRO, direct materials and equipment supplier that brings advanced technological solutions to maximize satisfaction of customers.
We are expert in import and export of adhesives, accessories and equipment in both domestic and cosmetic industrial fields, production and technology research and development.
Our solutions promise to bring best optimal effectiveness along with competitive prices, excellent customer services, dedicated on-site support.
Office address: The Verosa Park, 39 street 10, Quarter 2, Long truong Ward, Ho Chi Minh City, Viet Nam
Website: avantek.vn
Email 1: info@avantek.vn
Email 2: long.pham@avantek.vn
Tel: (+84) 944 415 762
Copyright © AVANTEK VN CO., LTD
Leave your information or contact via Hotline, our Customer Support Technical team will contact you immediately!