LOCTITE® EA 9514 is a toughened, single-component heat-curing epoxy adhesive with high shear and peel strength. It offers excellent impact resistance and high reliability in extreme temperature environments. The adhesive has good gap-filling capability and sag resistance, making it suitable for a variety of substrates. It can be cured using induction heating or conventional heat curing methods.
| Property | Value |
|---|---|
| Specific Gravity (25°C) | 1.42 – 1.48 |
| Yield Point (Pa∙s) | 272 |
| Casson Viscosity (mPa·s) | 30,000 – 60,000 |
| Casson Base Viscosity (mPa·s) | 42,000 |
| Flash Point | See SDS |
| Cure Condition | Typical Time |
|---|---|
| 120°C | 60 minutes |
| 150°C | 30 minutes |
| 175°C | Varies |
| Property | Value |
|---|---|
| Tensile Strength (ISO 527-3) | 44 N/mm² (6,380 psi) |
| Tensile Modulus | 1,460 N/mm² (211,700 psi) |
| Compressive Strength (ISO 604) | 62 N/mm² (900 psi) |
| Elongation (ISO 527-3) | 5.8% |
| Glass Transition Temperature (Tg) | 133°C |
| Thermal Conductivity | 0.3 W/(m-K) |
| Substrate | Strength (N/mm²) | Strength (psi) |
|---|---|---|
| Mild Steel (grit blasted) | 45 | 6,530 |
| Stainless Steel | 32 | 4,640 |
| Zinc Dichromate | 28 | 4,060 |
| Aluminum (abraded) | 40 | 5,800 |
| Aluminum (etched) | 40 | 5,800 |
| Brass | 25 | 3,630 |
| Galvanized Steel | 20 | 2,900 |
| Condition | % Strength Retained (after 3000 hrs) |
|---|---|
| Motor Oil (22°C) | 91% |
| Unleaded Gasoline (22°C) | 85% |
| 50% Water-Glycol (87°C) | 30% |
| 4% Sodium Hydroxide (22°C) | 65% |
| 98% RH (40°C) | 45% |
| Water (60°C) | 44% |
| Water (90°C) | 60% |
| Acetone (22°C) | 76% |
| Acetic Acid (10%, 22°C) | 51% |
| Saltwater (7.5%, 22°C) | 73% |
Stronger Bonding. Cleaner Process. Reliable Performance. If you are looking for an adhesive that combines high adhesion strength, flexibility, and electronic safety, 3320-80 is the
Everwide FX219G5 Silicone Potting Compound – high-thermal, UL94 V-0 silicone potting for electronic modules. Compare with Shin-Etsu KET-132 silicone potting.
FX244-1 A specialized two-part silicone rubber designed for creating high-precision molds. This material features a unique oil-bleeding property that creates a self-releasing surface, eliminating the need for external non-stick sprays during demolding.
As the year draws to a close and the Christmas season arrives, Avantek Viet Nam would like to extend our warmest Christmas greetings to all our valued customers, partners, and friends.
Avantek Viet Nam is a dynamic MRO, direct materials and equipment supplier that brings advanced technological solutions to maximize satisfaction of customers.
We are expert in import and export of adhesives, accessories and equipment in both domestic and cosmetic industrial fields, production and technology research and development.
Our solutions promise to bring best optimal effectiveness along with competitive prices, excellent customer services, dedicated on-site support.
Office address: The Verosa Park, 39 street 10, Quarter 2, Long truong Ward, Ho Chi Minh City, Viet Nam
Website: avantek.vn
Email 1: info@avantek.vn
Email 2: long.pham@avantek.vn
Tel: (+84) 944 415 762
Copyright © AVANTEK VN CO., LTD
Leave your information or contact via Hotline, our Customer Support Technical team will contact you immediately!
