SilFORT™ PHC XH100 is a thermally cured siloxane clear coat designed for enhanced adhesion to various types of polycarbonate (PC), including transparent, tinted, colored, or filled grades. It provides abrasion and chemical resistance, protecting coated surfaces from excessive wear.
| Property | Unit | Value |
|---|---|---|
| Solids Content | % by weight | ~25.5 |
| Solvent Composition | – | 1-Butanol, 2-Propanol |
| Flash Point (Closed Cup) | °C | 19.4 |
| Density (@ 20°C) | g/cm³ | ~0.93 |
| pH | – | 5.2 |
| Viscosity (@ 25°C) | cSt | 3 – 10 |
| Gardner Color | – | 1 – 5 |
| Shelf Life (@ 2 – 10°C Storage) | Months | 9 |
| Property | Test Method | Value |
|---|---|---|
| Taber Abrasion Resistance (500 cycles, CS10F wheels, 500g load) | ASTM D1003 | ≤ 2% Δ Haze |
| Taber Abrasion Resistance (1000 cycles, CS10F wheels, 500g load) | ASTM D1003 | ≤ 3% Δ Haze* |
| Water Immersion Resistance (65°C, 240 hrs, cross-hatch tape pull adhesion) | EN ISO 2409 | GT0 (No adhesion loss) |
*For improved abrasion resistance (≤ 2% haze after 1000 cycles), extended curing times (≥ 60 minutes) may be required.
| Process Step | Condition |
|---|---|
| Application Methods | Flow, Spray, Dip, or Spin Coating |
| Flash-Off Time | 2+ minutes @ 20-30°C, 30-60% RH |
| Curing Method | Thermal (Electric or Indirect Gas-Fired Oven) |
| Minimum Cure Conditions | 30 min @ ≥128°C (Part Surface) |
| Recommended Film Thickness | ≥6µm |
Advanced Epoxy Adhesive Solutions for Next-Generation UAVs and Drones As UAV and drone technology continues to evolve, manufacturers require adhesive solutions that can withstand demanding
Stronger Bonding. Cleaner Process. Reliable Performance. If you are looking for an adhesive that combines high adhesion strength, flexibility, and electronic safety, 3320-80 is the
Everwide FX219G5 Silicone Potting Compound – high-thermal, UL94 V-0 silicone potting for electronic modules. Compare with Shin-Etsu KET-132 silicone potting.
FX244-1 A specialized two-part silicone rubber designed for creating high-precision molds. This material features a unique oil-bleeding property that creates a self-releasing surface, eliminating the need for external non-stick sprays during demolding.
Avantek Viet Nam is a dynamic MRO, direct materials and equipment supplier that brings advanced technological solutions to maximize satisfaction of customers.
We are expert in import and export of adhesives, accessories and equipment in both domestic and cosmetic industrial fields, production and technology research and development.
Our solutions promise to bring best optimal effectiveness along with competitive prices, excellent customer services, dedicated on-site support.
Office address: The Verosa Park, 39 street 10, Quarter 2, Long truong Ward, Ho Chi Minh City, Viet Nam
Website: avantek.vn
Email 1: info@avantek.vn
Email 2: long.pham@avantek.vn
Tel: (+84) 944 415 762
Copyright © AVANTEK VN CO., LTD
Leave your information or contact via Hotline, our Customer Support Technical team will contact you immediately!
