| Property | Value |
|---|---|
| Specific Gravity | 0.98 |
| Viscosity (Brookfield RVT, 25°C, Spindle 2, 20 rpm) | 200 to 850 mPa·s (cP) |
| Flash Point | See SDS |
| Property | Value |
| Tack-Free Time (Zeta® 7200, 70 mW/cm² @ 365 nm) | ≤30 seconds |
| Depth of Cure (60 sec, 70 mW/cm² @ 365 nm, Zeta® 7200) | ≥4 mm |
(Cured @ 70 mW/cm² @ 365 nm for 60 sec, followed by 24 hrs @ 22°C, 50±5% RH)
| Property | Value |
| Shore Hardness (ISO 868, Durometer A) | 45 to 65 |
| Elongation at Break (ISO 527-3) | >80% |
| Tensile Strength (ISO 527-3) | >6.0 N/mm² (870 psi) |
| Compression Set (ASTM D 395, Method B, 24 hrs @ 22°C) | 7.9% |
| Dielectric Breakdown Strength (IEC 60243-1) | 15.3 kV/mm |
| Volume Resistivity (IEC 60093) | 1.10×10¹⁵ Ω·cm |
(Cured @ 70 mW/cm² @ 365 nm for 60 sec per side, plus 24 hrs @ 22°C, 50±5% RH)
| Substrate Combination | Lap Shear Strength (N/mm²) |
| Aluminum to Glass | 2.4 (355 psi) |
| Steel to Glass | 2.7 (400 psi) |
| Polycarbonate to Polycarbonate | 4 (590 psi) |
| Polycarbonate to Aluminum | 4.5 (650 psi) |
| Polycarbonate to Steel | 2.6 (380 psi) |
| Polycarbonate to ABS | 3.7 (540 psi) |
| Glass to PVC | 2.3 (330 psi) |
| Glass to Nylon | 1.3 (190 psi) |
| Test Condition | Change in Durometer (Points) | Change in Tensile Strength (%) | Change in Elongation (%) |
| Aged @ 177°C for 168 hrs | -22 | -64 | -24 |
| Aged @ 100°C for 168 hrs (Glycol/Water 50:50) | -10 | -14 | -9 |
| Aged @ 150°C for 168 hrs (5W30 oil) | -38 | -92 | +21 |
| Aged @ 150°C for 168 hrs (ATF) | -57 | -97 | +16 |
Advanced Epoxy Adhesive Solutions for Next-Generation UAVs and Drones As UAV and drone technology continues to evolve, manufacturers require adhesive solutions that can withstand demanding
Stronger Bonding. Cleaner Process. Reliable Performance. If you are looking for an adhesive that combines high adhesion strength, flexibility, and electronic safety, 3320-80 is the
Everwide FX219G5 Silicone Potting Compound – high-thermal, UL94 V-0 silicone potting for electronic modules. Compare with Shin-Etsu KET-132 silicone potting.
FX244-1 A specialized two-part silicone rubber designed for creating high-precision molds. This material features a unique oil-bleeding property that creates a self-releasing surface, eliminating the need for external non-stick sprays during demolding.
Avantek Viet Nam is a dynamic MRO, direct materials and equipment supplier that brings advanced technological solutions to maximize satisfaction of customers.
We are expert in import and export of adhesives, accessories and equipment in both domestic and cosmetic industrial fields, production and technology research and development.
Our solutions promise to bring best optimal effectiveness along with competitive prices, excellent customer services, dedicated on-site support.
Office address: The Verosa Park, 39 street 10, Quarter 2, Long truong Ward, Ho Chi Minh City, Viet Nam
Website: avantek.vn
Email 1: info@avantek.vn
Email 2: long.pham@avantek.vn
Tel: (+84) 944 415 762
Copyright © AVANTEK VN CO., LTD
Leave your information or contact via Hotline, our Customer Support Technical team will contact you immediately!
