DOWSIL™ EA-7300 is a silicone adhesive designed for rapid curing at lower temperatures, with a secondary moisture cure to enhance adhesion. It offers high elongation and low modulus, making it ideal for stress relief in applications exposed to thermal expansion mismatches or environmental conditions.
| Property | Value | Unit | Comments |
|---|---|---|---|
| General Characteristics | |||
| One or Two-Part | One | ||
| Color (Part A/Base & Dispensed) | Gray | ||
| Specific Gravity | 1.15 | g/mL | |
| Viscosity | |||
| 20 rpm, HAT 7 | 250,000 | cP | |
| 2 rpm, HAT 7 | 650,000 | cP | |
| Curing Properties | |||
| Cure Time at 105°C | 30 minutes | >90% final adhesion | |
| Cure Time at 125°C | 5 minutes | >90% final adhesion | |
| Mechanical Properties | |||
| Durometer | 20 | Shore A | ASTM D412 |
| Tensile Modulus (100% elongation) | 0.34 | MPa | ASTM D412 |
| Tensile Strength | 2.93 | MPa | ASTM D412 |
| Elongation | 600 | % | ASTM D412 |
| Adhesion Properties | |||
| Lap Shear Strength to AlClad | 1.89 | MPa | 5 min at 125°C + 7 days RT |
| Electrical Properties | |||
| Dielectric Strength (non-dried) | 15.7 | kV/mm | 2.0 mm thickness |
| Volume Resistivity | 1.1E+13 | ohm-cm | |
| Dielectric Constant (Permittivity) | 3.1 – 3.2 | 100 Hz – 1 MHz | |
| Dissipation Factor | 0.001 – 0.004 | 100 Hz – 1 MHz |
Advanced Epoxy Adhesive Solutions for Next-Generation UAVs and Drones As UAV and drone technology continues to evolve, manufacturers require adhesive solutions that can withstand demanding
Stronger Bonding. Cleaner Process. Reliable Performance. If you are looking for an adhesive that combines high adhesion strength, flexibility, and electronic safety, 3320-80 is the
Everwide FX219G5 Silicone Potting Compound – high-thermal, UL94 V-0 silicone potting for electronic modules. Compare with Shin-Etsu KET-132 silicone potting.
FX244-1 A specialized two-part silicone rubber designed for creating high-precision molds. This material features a unique oil-bleeding property that creates a self-releasing surface, eliminating the need for external non-stick sprays during demolding.
Avantek Viet Nam is a dynamic MRO, direct materials and equipment supplier that brings advanced technological solutions to maximize satisfaction of customers.
We are expert in import and export of adhesives, accessories and equipment in both domestic and cosmetic industrial fields, production and technology research and development.
Our solutions promise to bring best optimal effectiveness along with competitive prices, excellent customer services, dedicated on-site support.
Office address: The Verosa Park, 39 street 10, Quarter 2, Long truong Ward, Ho Chi Minh City, Viet Nam
Website: avantek.vn
Email 1: info@avantek.vn
Email 2: long.pham@avantek.vn
Tel: (+84) 944 415 762
Copyright © AVANTEK VN CO., LTD
Leave your information or contact via Hotline, our Customer Support Technical team will contact you immediately!
